Fantastic Vents or "Fantastic fans" as some say--either way they are wonderful!
HOW TO MEASURE FOR THE PROPER FANTASTIC VENT BASE PROFILE AND GARNISH DEPTH

-the easiest way I have found to do this is to remove the existing trim or light fixture inside the vehicle, using a stiff wire, screwdriver, etc. push stiff object along the outside edge of the vent (not the inside), being careful no wires are in the way, till it bottoms out against the vent roof flange (Measure twice, use a flashlight and make sure you are not pushing against a support brace or 2x2). When it bottoms out, hold your finger nail at the finished ceiling and remove the measuring object. Measure the object from your finger nail to end that bottomed out.

Here are some pictures which might help you understand.

Vent.jpg (8027 bytes) venttrimremoved.jpg (13012 bytes) ventscrewdriver.jpg (16106 bytes) ventmeasure.jpg (13441 bytes)

Page does not work?  Please click here. X  Thank you!
Created by Freddys Web Designs

07/24/14

2000  All rights reserved